How to Install Bamboo Woven Shades

morrahome-bamboo-shades-for-windows

Bamboo woven shades are a beautiful and natural way to add warmth and style to your home while controlling light and privacy. Installing them yourself is easy with a few basic tools and careful measurements.

Tools You’ll Need

  • Drill (with drill bits)
  • Screwdriver
  • Pencil
  • Measuring tape
  • Screws and mounting brackets (included)
  • Hammer (for expansion plugs, if needed)

Outside Mount Installation

  • Decide where you want to place your shade above the window.
  • Use a pencil to mark the installation location for the mounting brackets.
  • Drill holes at the marked points.
  • Align the bamboo shade with the mounting bracket codes.
  • Fix the mounting brackets into place using the screws.
  • Snap the shade into the brackets.
  • Align the screws with the bracket slots and rotate them outward to secure the shade firmly.

Inside Mount Installation

  • Align one bracket to the top side of the window frame.
  • Use a pencil to mark the location of the bracket’s holes.
  • Measure the vertical distance as shown in the installation video and note it down.
  • On the opposite side of the top beam, mark the same distance using the measuring tape.
  • Drill holes at both marked points.
  • Insert expansion plugs into the holes with a hammer.
  • Tighten the screws to secure both brackets.
  • Snap the bamboo shade into the brackets.

Final Steps

  • Test the shade by pulling the cord to make sure it rolls smoothly.
  • Adjust the alignment if necessary so the shade hangs evenly.
  • Wipe down the bamboo slats with a soft cloth to remove dust.

Your bamboo woven shades are now installed! Enjoy the natural look and adjustable light control they bring to your home.

Back to blog